Programming the ALTICE'O using ALTICOM
Page 22/28
Programming communication instructions
In ETHERNET Mode
-
Select DHCP Mode, where you enter IP Address, Subnet Mask, and Gateway.
-
Enter the DNS of your internet provider
Check the settings:
-
Server: mysyclope.com
-
Port: 18880
d)
Communication with website in WIFI mode
In WIFI Mode
-
Select DHCP Mode, where you enter IP Address, Subnet Mask, and Gateway.
-
Enter the DNS of your internet provider
-
Enter all the parameters of your WIFI connection
Check the settings:
-
Server: mysyclope.com
-
Port: 18880
e)
Controllers linking
It is possible to connect another device of the SYCLOPE product range to the website by using one of
the connection modes above, and on the same site connect up to five other devices using the linking
function.
The device having the modem is considered the
"master", it must then specify the list of "slaves"
connected to the RS485 BUS.
