Setting ALTICE'O
Page 15/28
Programming communication instructions
COMMUNICATION
–
WIFI
NETWORK
SSID:
Name of the wifi network to which you want to connect. To change it, press
the input field to open the alphanumeric keypad and enter the name of your
network.
Speed:
Press left and right arrows to change the communication speed over the
wireless network. This value is not to be modified in most of cases.
Channel:
Press left and right arrows to change the communication channel on the
wifi network. This value is not to be modified in most of cases.
Country code:
Press left and right arrows to change the code according to your
country.
ETSI = Europe
Mode:
Press left and right arrows to change the network mode.
Infra.
= Infrastructure (Network on which multiple elements can connect)
Ad-Hoc =
(Network on which only the controller will be connected)
Security:
Press left and right arrow keys to select the security mode of your
wireless network. Depending on the latter, it will be necessary to enter the
corresponding security key.
Security key:
If the network is secure and you have selected the security type in
the previous step, press the entry field to open the alphanumeric keypad and enter
the security key of your network
If you have not correctly selected the WIFI modem (see Chapter XIV, paragraph 3), this
message will appear and the configuration of this screen will not be allowed.
COMMUNICATION SETTING
LOCAL - MODBUS
BLUETOOTH
MYSYCLOPE
TCP/IP CONNECTION
SSID
WIFI NETWORK
ESCLAVES
Speed
AUTO
Country code
Code ETSI
Security
Disabled
Channel
11
Mode
Infra.
Security key
SSID
AUTO
11
ETSI
Infra.
Disab
You must select
the Ethernet or WIFI modem
