Sybase 12.5.1, Руководство пользователя

Страница: 53 / 210

CHAPTER 3 Starting and Stopping Historical Server
User’s Guide
39
Determining current activity on Windows NT
Before shutting down Historical Server, check current activity on Historical
Server to determine if you want to issue a deferred shutdown or an immediate
shutdown. A deferred shutdown lets all current activity complete before
terminating Historical Server.
Historical Server activity might include fully defined and initiated recording
sessions, uninitiated recording sessions with definitions still in progress,
playback sessions in progress, and playback sessions being defined. Client
connections can be from multiple machines and they might be monitoring
various Adaptive Servers.
To determine current activity in Historical Server, connect to Historical Server
with the
isql
utility and issue the
hs_status activity
command.
Deferred versus immediate shutdown on Windows NT
To close Historical Server, connect to it using the
isql
utility and issue one of
the following commands:
•
hs_shutdown
– defers shutdown until all active recording sessions
complete and any other active connections are closed. No new connections
are accepted during this time.
A deferred shutdown may block for an extended period of time, and typing
Ctrl+C while the
hs_shutdown
command is blocked inside the
isql
has no
effect.
•
hs_shutdown no_wait
– shuts down Historical Server immediately and
terminates any connections and active recording sessions.
In either case, the active recording sessions are shut down in a controlled
manner. The Historical Server control file and the historical data files are
available to Historical Server when it is restarted.
Detailed shutdown procedures on Windows NT
Shut down servers in the following order:
• Historical Server
• Monitor Server
• Adaptive Server
To stop Historical Server on Windows NT, use any of these methods: