Sybase 12.5.1, Руководство пользователя

Страница: 28 / 210

Initial configuration on UNIX platforms
14
Historical Server
• A Monitor Server paired with each Adaptive Server
• Historical Server
b Use either
dsedit
(if your system is running X-Windows) or
dscp
(a
command line utility) to add entries to an interfaces file. Follow the
instructions in Open Client/Server Configuration Guide for UNIX. To
add these entries, you must know the:
• Monitor Server and Adaptive Server names to which you want
Historical Server to connect.
• Port numbers or network addresses assigned to these servers
when they were configured. To research this information, use
dsedit
or
dscp
on the machine where a server was configured to
examine the appropriate interfaces file.
If you are relying on a directory service for making client/server
connections:
• Make sure that the libtcl.cfg file on the machine where Historical
Server was installed points to the appropriate directory service. Use
an editor to check and update libtcl.cfg files.
• Add Historical Server to the directory service, using
dsedit_dce
(if
your system is running X-Windows) or
dscp_dce
(a command line
utility). You need to know the Historical Server name to complete this
step.
6 Configure Historical Server on client machines.
This task enables clients to connect to Historical Server. Historical Server
clients are users who create recording sessions or playback sessions. Each
client machine must be configured appropriately.
See Open Client/Server Configuration Guide for UNIX for instructions on
using
dsedit
and
dscp
.
If you are relying on interfaces files for making client/server connections:
a Update all of the interfaces files used by Historical Server clients. The
client interfaces files must contain entries for:
• Historical Server
• Any Adaptive Server that you want to monitor through Historical
Server
• Monitor Server associated with each Adaptive Server listed