8
V1.0
EDID Config Panel
The
EDID Config
panel allows the EDID settings for each input to be configured as
required. Note that the HDR, 3D, 30Bit, 36Bit and 48Bit options may be used in any
combination, whereas only one audio mode can be selected. Whenever any of the
Copy
From TV1
to
Copy From TV4
options are selected, the option buttons below that
selection box are not available.
After making any changes, click the relevant Apply button to store them in the matrix switcher.
The Read button for each input group reads the data from the current EDID mode of the
respective input on the matrix switcher.
IP Config Panel
The
IP Config
panel allows the current IP settings to be viewed or changed. Note that
the
DHCP
checkbox should be unchecked to enable the
IP Address Setting
controls.
Once changes to the settings are complete, click on the
Save IP Config
button and then
reset the matrix switcher by either power-cycling the unit or clicking on the
Reset
button
on the
System Config
panel.