
V1.0
11
System Config Panel
The
System Config
panel provides the following features:
Specific commands can be sent to the matrix switcher when the
Apply
button
is clicked.
The matrix switcher can be reset to its current power on status. This will be
required whenever the IP settings are changed.
Turn the matrix switcher ON or OFF.
o
The OFF state is a standby mode that will only respond to the power
ON command. While in this mode the HDMI outputs and the front
panel of the matrix switcher are turned off.
Restore the matrix switcher to factory defaults. This will reset all settings back
to their factory defaults – use with caution when the following window appears: