
V1.0
13
EDID Config
The
EDID Config
page allows the user to set up the EDID options for each of the four
inputs. Note that the HDR, 3D, 30Bit, 36Bit and 48Bit options may be used in any
combination, whereas only one audio mode can be selected.
Each drop-down list provides the following EDID options:
1080p
4K2K@30Hz
4K2K@60Hz YCbCr 420 (shown as YC420)
4K2K@60Hz YCbCr 444 (shown as YC444)
Copy From TV1
Copy From TV2
Copy From TV3
Copy From TV4
Note that the last four options (
Copy From TV1
to
Copy From TV4
) do not allow any
changes to the option buttons below the respective selection box.
Be sure to only choose the options that are best suited to HDMI source equipment, or
use the Copy commands to make the HDMI input signal fully compatible with the
display device.
Click the respective
Apply
button to set the new EDID option for that input.