MHDBT-88P
sy.co.uk
6
Press
(hold for three seconds)
Inquiry Modes
Check status
Press and hold the button
ENTER
for 3 seconds to activate the system inquiry menu in the front panel LCD.
Use Left and Right direction button to navigate checking previous/next item.
Function Items
Example
Description
Check the connection
status of inputs
Y means the corresponding port is
connected with input device, N means
it is not.
Check the connection
status of outputs
Y means the corresponding port is
connected with output device, N means
not.
Correspondence
between inputs and
outputs
Shows the correspondence between
the 8 inputs and 8 outputs.
Check if the input is
with HDCP
Y means the input signal is with HDCP,
N means it is not.
Check if the output is
with HDCP
Y means the output signal is with HDCP,
N means it is not.
Check the output
resolution
Use button
to check all the 8
output resolutions.
Output Check
Press any output button to check its corresponding input.
Example: To check which input is connected to output 2.
Operation: Press Output 2 button, the LCD screen displays:
AV: 1-> 2
IR: 1-> 2
Also the indicators of the Input 1 and Output 2 buttons will turn on for 3 seconds. Showing that output 2 is
connected to input 1.
Clear Button
If you decide you do not wish to carry a command, press CLEAR button to cancel the operation. The matrix
will not perform the command and remain in its previous state.
IR Control
By using IR & HDBT transmission technology, the MHDBT-88P provides the following features:
x
Control of the remote output device from the location of the MHDBT-88P.
x
Control local input/output device remotely.
x
Control the MHDBT-88P locally/remotely.
In
1 2 3 4
Connect Y Y Y Y
Out
1 2 3 4
Connect Y Y N N
Out
1 2 3 4
Input
1 2 3 3
In
1 2 3 4
HDCP
Y Y Y N
Out
1 2 3 4
HDCP
Y Y Y N
Resolution
Out 1
1920x1080