6
V1.0
Getting a List of Supported Commands
Send the message
help!
to get a list of the supported commands. The MFS51-18G will output
a list of the supported commands where each one is enclosed in braces, e.g.
{s source 1!}
.
Selecting the inputs
RS232 Command
Response
Input Selected
s source 1!
source 1
HDMI 1
s source 2!
source 2
HDMI 2
s source 3!
source 3
HDMI 3
s source 4!
source 4
DisplayPort
s source 5!
source 5
VGA
The following command returns the currently selected input:
RS232 Command
Response
Function
r source!
See previous table
Return the current input selection
Setting Auto Switching Mode
RS232 Command
Response
Mode Selected
s auto switch 1!
auto switch 1
Last connected source
s auto switch 2!
auto switch 2
First connected source
s auto switch 3!
auto switch 3
Priority source
s auto switch off!
auto switch off
Auto switch is disabled
The following command returns the currently selected input:
RS232 Command
Response
Function
r auto switch!
See previous table
Return the current auto switching
mode
Setting the Input EDID
The following commands can be to set the HDCP mode or maximum resolution for the HDMI
inputs, or to copy the EDID from the display device connected to either the local HDMI output
or the display at the HDBaseT output.
RS232 Command
Response
EDID Setting
s edid 1!
edid 1.4
Set HDCP 1.4 mode (up to 4K30)
s edid 2!
edid 2.0
Set HDCP 2.2 mode (up to 4K60)
s edid 3!
edid copy HDMI
Copy EDID from local HDMI
output
s edid 4!
edid copy HDBT
Copy EDID from HDBaseT output
s edid 5!
edid auto
EDID pass-through
