SY Electronics SY-MFS51-18G, Руководство пользователя

Страница: 11 / 17

V1.0 11 sy.uk
System Commands
The following RS232 commands change various system parameters and should only be used
when necessary.
RS232 Command Response Function
s factory reset! factory reset
Return to the default factory
status
r version! Vm.rr
Get the current firmware version
number.
m = Major version
rr = Revision number.
xyz!
Upgrade the switch firmware
from the USB port
s power on! power on Turn on the MFS51-18G
s power off! power off MFS51-18G set to Standby mode
r power! Depends on power status Return the current power setting
s lock on! lock on Lock the front panel
s lock off! lock off Unlock the front panel
r lock!
Depends on panel lock
status Return the current front panel
lock setting
s beep on! beep on Turn on the button beep
s beep off! beep off Turn off the button beep
s sleep time 1!
s sleep time 2!
s sleep time 3!
s sleep time 4!
s sleep time 5!
s sleep time 6! Sleep time off
Sleep time 15 seconds
Sleep time 1 minutes
Sleep time 5 minutes
Sleep time 15 minutes
Sleep time 60 minutes
Set the sleep time for when no
input signal is detected
r sleep! As above Return the current sleep time
s osd time 1!
s osd time 2!
s osd time 3!
s osd time 4!
s osd time 5!
s osd time 6! OSD time out 5 seconds
OSD time out 10 seconds
OSD time out 15 seconds
OSD time out 20 seconds
OSD time out 25 seconds
OSD time out 30 seconds
Set the ODS time out
r osd time! One of the above Get the OSD time out