Q U I C K S T A R T
SX2 DualPRI V2
5
SX2 QuadBRI / SX2-express QuadBRI
Configuration of the PCI bus power supply (not SX2-express QuadBRI)
On the right side of the SX2 QuadBRI is a three-pole jumper field for setting the PCI bus
power supply.
Figure 7 PCI bus power supply of SX2 QuadBRI
Make sure that the jumper is at the correct setting for the PC main board.
Right ("3V3 reg") for an environment with 3 V, left for an environment with 5 V, which will
be found on older main boards.
Setting of the power supply
