3
4
5
6
7
8
1
2
MIG TORCH OVERVIEW
ALUMMIG
230
1.
2.
3.
4.
5.
TORCH LAYOUT
GAS Shroud
Swan Neck
Amps Up
NOTE:
The Amps can only be changed in
the MIG welding programs while not welding.
Amps Down
Trigger Switch
6.
7.
8.
EURO PLUG LAYOUT
LINERS
Torch Cable
Liner Retaining Nut
Torch Retaining Nut
The liner guides your wire inside the torch lead and
ensures the wire makes it out of the torch tip. You
may need to change your liner before you feed
your wire through, as these liners will only fit
specific sizes, the same as the drive rollers.
NOTE:
The torch comes pre-installed with a Teflon
liner that is to be used with 1.0 - 1.2mm
Aluminium Wires only. If using steel wires change
to the other 0.8 - 1.0mm liner included in the box.
STEEL LINER
TEFLON LINER FOR ALUMINIUM
