SKU 66630
For technical questions, please call 1-800-444-3353.
Page 18
Maintenance anD
Servicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO Prevent
SeriOuS injury
FrOM acciDental
OPeratiOn:
turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
tO Prevent SeriOuS
injury FrOM tOOl
Failure:
Do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, Maintenance, and
lubrication
beFOre eacH uSe,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
Check the Blade Guard assembly
2.
before and after every use.
aFter uSe,
3.
clean external surfaces
of the tool with clean cloth. .
To maintain the surface of the Table,
4.
periodically apply paste wax and
buff to keep Table surface smooth.
warning!
Do not wax the working
face of Miter Gauge. Doing so may
cause a workpiece to slip during cut-
ting, leading to possible injury.
aFter uSe,
5.
clean out sawdust from
underneath Table Saw and in Blade
teeth. Use a resin solvent on the
blade teeth. Dry with soft cloth.
Use soft, damp cloth to clean plastic
6.
parts.
warning!
Do not use any
aerosol or petroleum-based solvents.
Doing so can weaken or destroy
plastic, causing property damage and
leading to potential personal injury.
7.
warning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
