Operating the Walkie−Talkies
39
Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the
button. This signals to the
other party that you have ended transmission.
5
x
Open the menu
/
,
OF
Switch the confirmation signal on or off and
confirm it
Key tone
The key tone can be switched on or off.
6 x
Open the menu
/
ON
,
Switch the key tone on
/
OF
,
Switch the key tone off
Dual−channel monitoring
When dual−channel monitoring is activated, the walkie−talkie automatically switches
between two channels until a communication signal is detected. This means you can
talk to two callers on separate channels.
Starting dual−channel monitoring
7 x
Open the menu
/
,
Select an additional channel
/
,
Change the CTCSS code
When dual−channel monitoring is active, the channel currently set and the
additional channel appear alternately in the display.
Ending dual−channel monitoring
7 x
Open the menu
/
OF
/
ON
,
End dual−channel monitoring
Ringing tone
The ringing tones indicate to other subscribers that you want to talk to them. A condi-
tion for this is that the other subscribers are using the same channel and CTCSS
code.
Transmit the ringing tone
Monitor function
The Monitor function enables the search for weak signals on the channel currently set.
If you receive an external signal, switch to a free channel. Always communicate with
other subscribers on a free channel to prevent interference.
Monitor the channel
Enter the conversation
End monitoring
