- Operation -
50
3.2
Switching the radios on and off
To switch on the radio, hold the On/Off button
pressed until a signal
tone sounds. The display will be illuminated for some seconds and all
the symbols will be shown in the display. After this the display will show
the currently selected channel.
To switch the radio off, hold the On/Off button
pressed once more
until a signal tone sounds.
3.3
Volume control
The volume of the built-in loudspeaker can be displayed in 16 volume
steps using the
and
buttons on the right. The volume set will be
shown in the display.
3.4
Channel selection
The radios have 8 different transmission channels, which are released
by the European Committee for Radio Communications as " Private
Mobile Radio" channels, known as PMR for short.
In order to be able to speak between two radios, both units must
be set to the same channel.
1. Press
the
MODE
button once. The
CHAN
indicator will flash in the
display.
2.
Select the required channel using the
and
buttons.
3.
Confirm the selection with the talk button on the left-hand side.
