- Commissioning -
47
+
THIS SIDE UP
2
Commissioning
2.1
Check contents of pack
The following items are supplied
two radios with belt clip
one charging station
two battery packs
one mains power supply
one instruction manual
two headsets
2.2
Fitting the battery packs
Your radio units are supplied with two rechargeable battery packs,
which must be fitted before using the equipment.
1.
To release the belt clip, pull gently on the upper
tab and slide the belt clip upwards (see 2.3).
2.
Then open the compartment by pulling the
cover upwards by the catch.
3.
Now insert the battery pack taking care to
ensure that the polarity is correct. The wrong
polarity can damage both the battery pack and the unit.
4.
Close the battery compartment and re-fix the belt clip (see 2.3).
Note:
When the battery pack is weak and needs to be recharged, the
battery symbol will flash in the display. When the battery is fully
charged, the symbol will appear.
Do not throw batteries into the fire or immerse in water. Do not dispose
of old or defective batteries with the normal household waste.
Note:
In place of the battery pack you can also use three
not
rechargeable
1.5V AAA alkaline batteries. Please use only the best
quality. Take care to ensure that the polarity is correct when inserting.
