76
77
78
79
Telephoning
90
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in order to
consult with someone. The external caller is put on hold while you con-
verse with the second, internal person called. You can switch between the
callers as often as necessary.
HS1: Int
,
or
e.g. Handset 2 , Ok
Dial the internal call number during the
conversation with the external caller
HS2:
Take the internal call on the other
handset
HS1: Brok
Change back and forth between the
callers
Conference calls
An external call can be transferred to another internal handset for a confe-
rence call.
HS1: Int
,
or
e.g. Handset 2 , Ok
Dial the internal call number during the
conversation with the external caller
HS2:
Take the internal call on the other
handset
HS1: Conf
Start the conference
At this point, you can switch between the two callers as neces-
sary and then back to the conference.
HS1/HS2:
The conference is terminated by one of
the internal handset users ending the call
Adjusting the receiver volume
The volume can be adjusted to one of 5 settings during a call.
or
Select the required volume
Talk time display
The duration of a received call is displayed in hours, minutes and seconds
during the call.
Handsfree
This function is used to listen to the caller via the loudspeaker.
Activate handsfree mode
Deactivate handsfree mode
Muting the microphone in the handset
The microphone in the handset can be activated and deactivated during a
telephone conversation.
Deactivate the microphone (muting
function activated)
Activate the microphone
Key lock
3 sec
Activate the key lock function
Incoming calls can still be taken in the normal way even when the
key lock function is activated.
3 sec
Deactivate the key lock function
Handset ringing melody
The ringing melody on the handset can be switched off.
3 sec
Deactivate the ringing melody
The ringing tone setting on the base station remains unaffected.
3 sec
Activate the ringing melody
Searching for the handset (Paging)
If you have mislaid your handset, you can locate it again with the aid of a
search tone.
{«}
Activate the search tone
or
End the search tone
Switching the handset on and off
You can switch the handset off in order to save the batteries.
2 sec
Switch off HS?
Yes or No
Confirm or cancel the function
2 sec
Switch the handset on
Содержание DFT 807 Series
Страница 106: ...Notes 106 Notes...
Страница 107: ...Notes 107 Notes...