switel DFT 107 series, Руководство по эксплуатации

Страница: 88 / 116

86
Preparing the Telephone
88
Inserting the batteries
Open the battery compartment cover. Insert the batteries in the open
battery compartment. Only use batteries of the type AAA NiMH 1.2 V.
Pay attention to correct polarity. Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the
base/charging station for
at least 15 hours.
When the handset is inserted in the base/charging station properly,
you will hear an acoustic confirmation signal and the charge control
lamp lights up. The handset warms up during the charging process.
This is normal and does not represent a risk. Do not charge the hand-
set with charging units from other manufacturers. The current
battery
charge status is indicated in the display:
Full Semi−discharged Empty
Setting the display language
Select the language required (see Menu Structure"on Page 95):
Menü > Mobilteil-Einst. > Sprache >...
Menu > Set Handset > Language >...
Setting the date and time on the handset
The time and date are set via the menu. Refer to Page 98 for the se-
quence of menu option selections.
Auto answer (Auto-Talk)
If this function is activated, an incoming call is taken when the handset
is removed from the base station. The automatic answering function is
activated and deactivated using the menu. Refer to Page 99 for the
sequence of menu option selections.
Private branch exchanges
The information on Page 94 explains how to install your telephone in
a private branch exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of
standard DECT cordless telephones when in Standby
mode (when the handset is in the base station).
In talk mode, radiation is reduced (depending on the distance bet-
ween the handset and base station).
Default setting = Settings
→
Set Base
→
ECO Mode
→
Off
The telephone can be set up so that the radiation frequency is redu-
ced;
Page 99.
If necessary, you can increase the range of the telephone sy-
stem by switching ECO mode off .