− Telephone Answering Machine −
126
12.5
Outgoing messages
12.5.1 Selecting the answering mode
The answering machine is provided with two, pre−recorded outgoing messages. A di-
stinction is made between
outgoing message with message recording
(OGM 1) and
out-
going message only
(OGM 2). If no other outgoing message is recorded, the pre−recor-
ded outgoing message is played automatically. When the answering machine memory
is full, it automatically reverts to the
outgoing message only
(OGM 2) message explaining
to the caller that messages cannot be left.
Proceed as follows to change the answering mode:
First, switch the answering machine OFF.
2 sec
Activate the outgoing message mode.
Selects OGM 1 (with recording)
Selects OGM 2 (without recording)
The outgoing message currently set is then played back.
12.5.2 Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 1:30 minutes
long. Firstly, select the outgoing message type you want to replace (refer to Section
12.5.1). The respective, pre−recorded outgoing message is replaced by the one you re-
cord. The pre−recorded outgoing messages can be restored simply by deleting your own
outgoing messages (refer to Section 8.5.4).
Activate outgoing message mode.
or
Wait until the outgoing message has been played
and then press and hold the Rewind button (to
change OGM 1) or Forward button (to change
OGM 2).
!
Speak your message after the acoustic signal. To
end recording, simply release the
or
button.
The new outgoing message is played back.
12.5.3 Playing the current outgoing message
Play the outgoing message
Stop playback
12.5.4 Deleting your own outgoing message (resetting default outgoing
message)
After deleting your own outgoing message, the pre−recorded message is automatically
reactivated.
Play the outgoing message
"
Delete your own outgoing message /
Activate default outgoing message
