switel DE 331, Руководство по эксплуатации

Страница: 25 / 28

5
GB
Registering a handset
☞
Five handsets can be registered to a base station. The handsets deli-
vered with your telephone are already registered. To register a “foreign“
handset please refer to it’s user manual.
First of all disconnect the base station from the mains and re-connect
it. After this the base station will be in registration mode for 3 minutes.
… press and hold for approx. 3 seconds until
and flash.
… press and hold for approx. 3 seconds.
Enter a number for the base station (1 … 5) to subscribe to.
Enter the PIN for the base station (default setting for DE 331 base sta-
tion “0 0 0 0“).
If the handset is registered the display will show
HS
and the handset’s
internal telephone number.
Deleting a handset
☞
You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but
you are not able to remove the handset you are using.
… press and hold for approx. 3 seconds.
… press and hold for approx. 3 seconds.
Enter the PIN for the base station (default setting for DE 331 base sta-
tion “0 0 0 0“).
Enter the internal telephone number (1…5) of the handset you want to
remove.
The handset will go back to standby is the removal is successfully.
Ringtone melody (handset)
… press and hold for approx. 3 seconds. The current melody sounds.
… select the desired melody.
Press
to confirm the setting.
Ringtone volume (handset)
… press briefly. The handset will ring in the current volume.
… select the desired volume. When the volume is “0“ (ringer off),
appears in the display.
Press
to confirm the setting.
Setting the flash time
☞
You can set the flash time to 100 ms (usually for special services of
your telephone provider/delivery state) or 300 ms (e. g. for a telephone
exchange). In case of questions please contact your telephone provider or
the system administator of your PBX.
… press and hold for approx. 3 seconds. S (100 ms) or L (300 ms)
appears in the display. For switching the flash time press and hold
again for approx. 3 seconds.
Setting the dial mode (tone / pulse)
☞
You can switch the dial mode. In most situations the TONE option
should be selected.
… press and hold for approx. 3 seconds. t (tone) or P (pulse) appears
in the display. For switching the dial mode press and hold again
for approx. 3 seconds.