Private Branch Exchanges
GB
93
10. Private Branch Exchanges
R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Please refer to the operating manual supplied with your private branch
exchange to determine which recall (Flash) time must be set in order to
use these functions. The dealer where you purchased the exchange can
provide information as to whether the telephone will work properly with the
exchange.
Setting the Recall time
Two recall timings are available. Short 100ms and Long 300ms.
,
or ,
Open the Menu, select ‘RECALL’
SHORT
The current setting is shown
or ,
Select and confi rm ‘SHORT’ or ‘LONG’
Dialling pause
In the case of private branch exchanges, it is necessary to enter an access
code to get an outside line with its corresponding dialling tone. When
using some older private branch exchanges, it takes a little time before the
dialling tone becomes available. Particularly in the case of such private
branch exchanges, it is possible to insert a dialling pause after the number
for the outside line so that the number can be dialled in a continuous
process without having to wait for the dialling tone.
2 sec
Insert a dialling pause. ‘P’ is shown
in the display.
The pause can also be entered with the phone number in the phone book.
R button and Supplementary services
Your telephone supports the supplementary services offered by your
telephone network provider, such as call brokering, call waiting and
conference calls. The supplementary services can be used in conjunction
with the R button. Please contact your telephone network provider with
regard to enabling the supplementary services and which recall time must
be used.
Dial mode
Two dialling modes are available, Tone and Pulse. Only change this setting
if you are advised to do so by your private branch exchange dealer.
, or ,
Open the Menu, select ‘DIAL MODE’
TONE
The current setting is shown
or ,
Select and confi rm ‘TONE’ or ‘PULSE’
Reset to default settings
You can reset your handset to its original default settings. The phone book,
calls and redial lists are not deleted when you reset the handset.
, or ,
Open the Menu, select ‘RESET’
,
,
Enter the PIN code and confi rm
Switel DCT6071.indd 93
Switel DCT6071.indd 93
6/6/08 14:22:46
6/6/08 14:22:46
