- Setting up -
84
3
Setting up
3.1
Safety information
NOTE:
Before setting up, it is essential that you read the Safety Information at the beginning of this operating
manual.
3.2
Check contents of pack
The following items are supplied:
one base station
one mains cable
one handset
two standard batteries
one telephone connecting cable
one instruction manual
3.3
Connecting the base station
Position the telephone near to your telephone connection socket and to a mains socket.
1.
Insert the plug of the power supply into the socket on the backside of the base station and plug the power
supply into a properly installed 230 V mains socket. The plug-in power supply for the base station must always
be connected. For safety reasons, use only the plug-in mains power supply provided.
2.
Connect the telephone cable supplied to the telephone socket and the telephone jack on the backside of the
base station. Use only the new telephone cable provided.
3.4
Fitting standard batteries
To fit the standard rechargeable batteries supplied into the handset, press on the upper
edge of the battery compartment and slide it downwards. Now insert the batteries taking
care to ensure that the polarity is correct. Close the battery compartment cover.
Important note:
Place the handset in the
base station
with the display to the front
for at least 16 hours
. The
telephone may malfunction if the batteries are not properly charged. The charging light
on the base station will
come on.
3.5
Charging the standard batteries
The rechargeable batteries for your telephone have a stand-by time of max. 110 hours at room temperature and a
maximum talk time of up to 8 hours.
The current battery capacity is shown in the display.
Full
Half
Low
If the battery capacity is too low, you will see a display message.
To charge the batteries, place the handset in the base station with the display to the front.
3.6
Tone (TD) or pulse (PD) dialling
This trend-setting feature enables you to use your telephone both on analogue exchanges (Pulse Dialling/PD) and on
digital exchanges (Tone Dialling/TD). The unit is set in the factory to Tone Dialling (TD). If your telephone does not
work on your exchange, you can find out under Section 8.2.4 how to set up your telephone for pulse dialling (PD).
+
AAA
+
AAA
Содержание D8525
Страница 108: ...www switel com...
