SwitchBot W2500020 Скачать руководство пользователя страница 15

NFC Card Unlock

• 

Amount of NFC cards supported:

 You can 

  add up to 100 NFC cards, including 

  permanent cards and temporary cards. 

  When the amount of NFC cards added has 

  reached the max. limit, you will need to 

  delete existing cards to add new ones.

• 

How to add NFC cards:

 Follow the 

  instructions in the app and put a NFC card 

  close to the NFC sensor. Do not move the 

  card before it has been added successfully.

• 

Security settings:

 Your Keypad Touch will 

  be disabled for 1 minute after 5 failed 

  attempts to verify a NFC card. Another 

  failed attempt will disable your Keypad 

  Touch for 5 minutes and the disabled time 

  will increase by double with following 

  attempts. The max. disabled time is 24 

  hours, and each failed attempt after that 

  will cause it to be disabled for another 

  24 hours.

• 

NFC card lost:

 if you've lost your NFC card, 

  please delete the card as soon as possible 

  in the app.

Fingerprint Unlock

• 

Amount of fingerprints supported:

 You 

  can add up to 100 fingerprints, including 

  90 permanent fingerprints and 10 

  emergency fingerprints. When the amount 

  of fingerprints added has reached the max. 

  limit, you will need to delete existing 

  fingerprints to add new ones.

• 

How to add fingerprints:

 follow the 

  instructions in the app, press and lift your 

  finger to scan it for 4 times to add your 

  fingerprint successfully.

• 

Security settings:

 Your Keypad Touch will 

  be disabled for 1 minute after 5 failed 

  attempts to verify a fingerprint. Another 

  failed attempt will disable your Keypad 

  Touch for 5 minutes and the disabled time 

  will increase by double with following 

  attempts. The max. disabled time is 24 

  hours, and each failed attempt after that 

  will cause it to be disabled for another 

  24 hours.

23

24

Содержание W2500020






















Отзывы: