Tips: Make sure the installation surface is smooth
and clean. Make sure the temperature of the
adhesive tape and installation surface is higher than
0℃, otherwise the tape adhesion may decline.
Attach adhesive tape to the back of mounting
plate, then stick the mounting plate to the
wall at the marked position. Press the
mounting plate against the wall for 2 minutes
to ensure it is firm.
Step 2: Attach Mounting Plate to the Wall
Add your Keypad Touch following the
instructions on our app. After adding
successfully, find a suitable position on the
wall, attach your Keypad Touch to the position
with your hands, then check if you can lock
and unlock SwitchBot Lock smoothly using
Keypad Touch. If so, use pencil to mark
the position.
15
16
