REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Pass the 120-volt supply wires through the center
hole in the ceiling hanger bracket as shown in Fig.
1b.
Secure the hanger bracket to the ceiling outlet
box with the screws and washers provided with
your outlet box.
INSTALLING YOUR FAN
STEP.
01
04
Attach the blades to fan motor assembly using
screws, spring washers and washers as shown in
Figure 2. Insert a screw, spring washer and
washer into the blade's middle hole and fasten it.
Repeat this step for the other remaining blades.
Attach the upper blade holder ring system as
shown in Figure 3. Insert two screws and washers
into another 2 holes of the blade and fasten
them. Repeat these steps for the remaining
blades.
Remove the locking pin from the hanger bolt
from the downrod, unlock the bolt. ( shown as
Fig. 4)
Fig.1a
Fig.1b
STEP.
02
Fig.2
STEP.
03
Fig.3
STEP.
04
Fig.4
or
Turn Off Power Source
Turn Off Power Source
Blade screw A
Blade screw B
