SWIT Electronics FM-21HDR, Руководство пользователя

Страница: 36 / 51

MARKER MAT
The marker mat marks the outside area of the marker display with the appointed
transparency.
For example, set ASPECT as 16:9, Aspect Marker as 4:3, and Area Marker as 95%,
then, the comparison of the three Marker Mats are as shown in Figure 5.1-13:
Figure 5.1-13 MARKER MAT
MARKER FIT
The USER CONFIG

Marker Fit item is used to whether set up the connection
between area marker and safety marker.
Set Marker Fit item as OFF, the safety area is based on the whole current image
display, while Set Marker Fit item as ON, the safety area is in the range of area
marker, the comparisons are as shown in Figure 5.1-14
Figure 5.1-14 MARKER FIT

The
Aspect Marker
,
Center Marker
and
Area Marker
feature are available only when
the Marker item is set to ON .

The safety marker area will change with the area marker when setting Marker Fit item
to be ON .

The cross hatch lines will display only in the single image or in PIP mode when Cross
Hatch is ON .