SWIT Electronics FM-21HDR, Руководство пользователя

Страница: 12 / 51


Save/Back: confirm the selection and back to the higher level menu.

Turn Page: when the current selection in the sub-menu list is Next Page , press
this button to turn to the next page circularly.
F1/U1
This button is a FUNCTION and User Preset button.

F1 function: The F1 function can be assigned via the CONFIG menu. Press
the function button to activate or deactivate the assigned function. Press F1 to
display the function menu list in the center of the screen, as shown in Figure
4.1-4. Toggle
F1 button to change the value related to this function.
Figure 4.1-3 Function Menu List

USER1: Switch to User Preset USER1 directly. Hold 2 seconds to select the
current user preset to be User1. The name of the current user preset will be
prompted on the left center of the screen. Refer to “5.1.4.1 FUNCTION KEY
and User Preset Menu” for the setting of
User Preset.

If the value related to the function button can’t be modified, the value shows in gray.

For F2/U2~F4/U4 function buttons, the operations are as the same as F1/U1's.

Use FUNCTION KEY menu to assign F1~F4. You can assign the function from
among: Camera LUT, Undef, Blue Only, Mono, Marker, Audio Meter, Time Code,
Waveform Type, Vectorscope, Histogram, Scan, Aspect, Native, Mute, IMD Display,
False Color, Focus Assist, Peak, Zebra. Refer to "5.1.4 USER CONFIG Menu" for the
details.
Power
Used to power on or standby, and the light in the button will indicate the status of the
power. When the monitor is powered on, the light is green, press the power button
and hold 2 seconds, it will enter into standby mode, the light is red.
Rear Panel Features
It will introduce the arrangement and the operations of the interfaces in rear of the panel