⑴ Time Code（SDI）
Under SDI input, the monitor can display Time code information (LTC, VITC1&2). If no Time code info
is detected, it will display “TC UNLOCKED”. User can set function keys F1～F5 or GPI pins as “Time
Code” to turn on or off this function.
⑵
On screen TALLY
Display TALLY signal from GPI port.
⑶
Source ID/UMD
Display TSL 3.1/4.0 UMD or User input Source ID.
⑷
Color Checker
After auto calibration, the color gamut and chromatic aberration (△E) before and after the
color correction pop up. "Auxiliary focus" - "color check" and "automatic color calibration" -
"measurement" pops up the gamut value and color difference value (△E) of the previous
calibration and this measurement.
⑸
Lissajous
Lissajous diagram showing audio signal. Users can set the shortcut key (F1～F5) or GPI pin on the
front panel to “Lissajous” function and turn it on/off.
⑹
Audio VU/PPM meters
Display meters of SDI/HDMI embedded audio or analog audio. The audio meter display channels, on
screen positions, markers and background colors are adjustable. User can set function keys F1～F5
or GPI pins as “Audio Bar” to turn on or off this function.
⑺
Histogram
Parallel display R/G/B/Y histogram for SDI and HDMI video. User can set function keys F1～F5 or GPI
pins as “Histogram” to turn on or off this function.
⑻
Vector
Display vector scope with 100% and 75% markers for SDI and HDMI video. The vector scope pattern
display positions, colors, background are adjustable. User can set function keys F1～F5 or GPI pins
as “Vector” to turn on or off this function.
⑼ Waveform
The display waveform can be selected from Y/Cb/Cr/R/G/B/RGB types, and single line display
mode selectable. The waveform display positions, colors, background are adjustable. User can
set function keys F1～F5 or GPI pins as “Waveform” to turn on or off this function.
08
·OSD
TC
00:15:13:07
CAMERA 1
R
R75
Mg
Mg75
B
B75
Cy
Cy75
G
G75
YI
YI75
W
Delta = 1.0
R
R75
Mg
Mg75
B
B75
Cy
Cy75
G
G75
YI
YI75
W
Delta = 0.0
(1)
(6)
(5)
(4)
(3)
(2)
(7) (8)
（
9
）
in phase
L
R
