Menu Configuration
Menu configuration introduces the main menu and each sub-menu. Menu items marked * will give
more detailed menu description or operation explanation after the list
12
⑴ Time Code（SDI）
Under SDI input, the monitor can display Time code information (LTC, VITC1&2). If no Time code info
is detected, it will display “TC UNLOCKED”. User can set function keys F1～F5 or GPI pins as “Time
Code” to turn on or off this function.
⑵
On screen TALLY
Display TALLY signal from GPI port.
⑶
Source ID/UMD
Display TSL 3.1/4.0 UMD or User input Source ID.
⑷
Color Checker
After auto calibration, the color gamut and chromatic aberration (△E) before and after the
color correction pop up. "Auxiliary focus" - "color check" and "automatic color calibration" -
"measurement" pops up the gamut value and color difference value (△E) of the previous
calibration and this measurement.
⑸
Lissajous
Lissajous diagram showing audio signal. Users can set the shortcut key (F1～F5) or GPI pin on the
front panel to “Lissajous” function and turn it on/off.
⑹
Audio VU/PPM meters
Display meters of SDI/HDMI embedded audio or analog audio. The audio meter display channels, on
screen positions, markers and background colors are adjustable. User can set function keys F1～F5
or GPI pins as “Audio Bar” to turn on or off this function.
⑺
Histogram
Parallel display R/G/B/Y histogram for SDI and HDMI video. User can set function keys F1～F5 or GPI
pins as “Histogram” to turn on or off this function.
⑻
Vector
Display vector scope with 100% and 75% markers for SDI and HDMI video. The vector scope pattern
display positions, colors, background are adjustable. User can set function keys F1～F5 or GPI pins
as “Vector” to turn on or off this function.
⑼ Waveform
The display waveform can be selected from Y/Cb/Cr/R/G/B/RGB types, and single line display
mode selectable. The waveform display positions, colors, background are adjustable. User can
set function keys F1～F5 or GPI pins as “Waveform” to turn on or off this function.
1. Input ‒ Set the color of input audio
*1.Input range
Set the audio input range to fit the input audio signal. The default audio input range is 64-940 for
broadcast applications. When Four-screen is selected, the input range of 4 channels SDI signal can
be adjusted separately for display.
*2.YUV color matrix
When Four-screen is selected, the color matrix of 4 channels SDI signal can be adjusted separately
for display.
2. Image *1—Setting for the picture preference
3. Color management—Settings about video colors
*1. Image
Contrast, brightness, saturation and backlight can be quickly adjusted by the front panel short-
cut keys
Menu Item
Input Range *1
YUV Color Matrix*2
Red Gain
Green Gain
Blue Gain
Red Bias
Green Bias
Blue Bias
Reset
Menu Description
Set the input range for input audio
Select quantized YUV color matrix
Adjust Red Gain
Adjust Green Gain
Adjust Blue Gain
Adjust Red Bias
Adjust Green Bias
Adjust Blue Bias
Reset the gain and bias values of the settings
Value
0-1023,4-1019,64-940,64-1023
Auto,BT.601,BT.709,BT.2020
-100 ~ +100
-100 ~ +100
-100 ~ +100
-100 ~ +100
-100 ~ +100
-100 ~ +100
/
Menu Item
Contrast
Brightness
Saturation
Sharpness
Backlight
Menu Description
Adjust to display contrast
Adjust to display brightness
Adjust to display saturation
Adjust to display sharpness
Adjust to display backlight
Value
-100 ~ +100
-100 ~ +100
-100 ~ +100
0 ~ +100
0 ~ +100
Menu Item
Color gamut *1
Gamma*2
Menu Description
Set gamut values
Set gamma values
Value
LCD Panel,DCI-P3,Rec.709,Rec.2020
1.0,1.8,2.2,2.4,2.6,PQ1000,HLG1000,S-Log3
Gamut and
gamma
values are
set to menu
items with
specific
values
Soft Clip *3
HLG System
Gamma *4
D-Log to 709 *5
D-Log to PQ
Turn on or off Soft Clip
Set HLG System Gamma
Set gamut to Rec.709 camera table
Camera table when gamut is set to
Rec.2020 and gamma value is PQ1000
OFF,ON
1.0,1.1,1.2,1.3,1.4,1.5
OFF,J-Log1,Log-C,S-Log2,C-Log,V-Log,RedLogFilm,
S-Log3,User-Log
OFF,ARRI_LogC_PQ,Canon_CLog2Cin_PQ
Canon_CLog3Cin_PQ,Panasonic_VLog_PQ,
RED_L3G10_PQ,Sony_SLog3_Cin_PQ,
Sony_SLog3_SG3_PQ
