*3. H/V Delay
H/V Delay is not displayed on HDMI channel.
8. Auto Calibration*1
Menu Item
Probe Select *2
Start Calibration*3
Measure*4
Menu Description
Select a probe to use
Select whether to start calibration
Test current color
Value
X-rite l1 Pro OEM, Jeti Specbos 1211
No/Yes
No/Yes
*1.Auto Calibration
The monitor has 3D LUT calibration software built-in, and supports the following color
sensor probe to directly plug into front USB port. When start calibration, the monitor will
generate standard colors and the color sensor will read the colors one by one and upload
result to the monitor by USB connection. The monitor will comparing the generated
colors and sensor read colors, to work out 3D LUT cube and calibrate itself automatically.
*2.Probe Select
This monitor supports the following probes models:
BRAND
X-rite
JETI
MODE
I1 Pro OEM
Specbos 1211
*3.Start Calibration
Steps:
1、Put the monitor into a dark room. Switch on the monitor.
2、Connect the calibration instrument (compatible with x-rite and JETI color measuring
instruments) and monitor via USB. Before calibration, ensure that the monitor and the color
calibration instrument are in good condition and the monitor aging time reaches 30 minutes.
3、Enter the “Probe Select” and select the currently used calibration probe.
4、Enter the “Start Calibration” and select “yes” to start calibration. The monitor will display the
prompt message and the color position prompt box. Put the sensitive part of the device in the
color position prompt box correctly. Note that when placing the calibration instrument; do not
squeeze the monitor’s LCD screen.
19
Audio alarm information
M
T
U
E
M
T
U
E
M
T
U
E
M
T
U
E
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
U
N
L
O
C
K
E
D
1 2 3 4 5 6 7 8 910111213141516
-48
-20
-09
L -32DB 01CH
R -13DB 02CH
Left Channel:1 Green
Right Channel:2 Red
Type 1
Type 2
