Swissvoice IP 15, Руководство пользователя

Страница: 21 / 42

02C110500C - web 21
Telephone configuration
This section is about user-defined settings and operating modes to make your Swissvoice IP
telephone even easier to use. It provides easy-to-follow instructions and eliminates the need for
you to remember access codes or operating sequences.
Points to remember when configuring your telephone
Configuring is an integral part of the operating concept; before you start configuring, read the
chapter “The menu system” at the beginning of these operating instructions.
The receiver
While configuring your Swissvoice IP telephone, it is advisable to keep the receiver on hook. If you
lift the handset during configuration, the configuration sequence will be interrupted. If you accept a
call while you are configuring, you will return to the configuration once your call is over.
Configuration mode
You can go to the beginning of the configuration mode in one of two ways:
■
Press the MENU key long (at least 2 seconds), or
■
Press the MENU key repeatedly, until "User settings" appears; press OK under "User settings".
MENU key
With the MENU key you can move at two levels: at the configuration level (for example, "Display") or
at its sub-function level (for example, "Time"). You can leave either level by pressing the END key.
END key
With a short click on the END key, you go back to upper menu.
A long click allows to go back to idle text and to end the configuration mode.
Saving the data
Save the contents of a menu item that you have configured or changed by pressing the Function
key under "OK". If you press the Function key under "Back" or the "END" key, your changes will
not be saved.