
52
20405435en_ba_d0
Telephony
1. Press the softkey under
MENU
. Press
to scroll to
TELEPHONY
in the
SETTINGS
menu and press
OK
to confirm.
2. Scroll to the relevant submenu and make the following settings:
Auto Talk
An incoming call can be accepted by pressing the talk key. If you activate Auto Talk, you can
accept a call simply by lifting the handset from the base station without pressing any key.
Automatic DTMF
Activate “Automatic DTMF” to switch automatically to DTMF dialling during an active call.
System PIN
1. Press the softkey under
MENU
. Press
to scroll to
SYSTEM PIN
In the
SETTINGS
menu and press
OK
to confirm.
2. Change the existing system PIN as required.
Note
• If you wish to register/deregister new handsets with the base station, you
must enter the base station’s 4-digit system PIN (default setting: 000).
• We recommend that you change the system PIN to protect your telephone
against unauthorised access.
•
Attention:
Please take good note of your new system PIN! If you forget it,
a technical intervention is necessary. This service will be charged.
Repeater
You can use up to 6 repeaters to extend the range and receiving power of your base
station. The repeaters must first be registered and activated on the base station.
Per repeater, up to 2 handsets can conduct a call simultaneously.
1. Press the softkey under
MENU
. Press
to scroll to
REPEATER
in the
SETTINGS
menu
and press
OK
to confirm.
2. Switch the repeater mode on/off.
Settings