8
20405435en_ba_d0
Setting up the telephone
Connecting the phone
Before you can start using your telephone you must plug in the telephone connector cable
and the mains cable.
Safety note
Use only one of the following supplied mains adapters for the base station:
- 6V
600mA SSA-5W-05 EU 060060F
- 6V
600mA SSA-5AP-09 EU 060060
- 6V
600mA S004LV0600060.
➀
Telephone connector cable
The telephone connector cable has two different plugs. Insert the smaller plug in the
socket marked with the telephone symbol on the base station. Insert the larger plug in
your telephone connection socket.
➁
Mains cable
First, insert the mains cable in the socket marked with the mains connector symbol
on the base of the base station or charging unit. Then insert the mains plug in the
230 V socket.
Note
Your telephone will not function if the mains connector is not plugged in or
during a power failure.
Setting up the handsets
Your handsets will be ready for operation (for making or accepting calls) only once the
batteries have been fully charged for the first time.
Inserting the rechargeable batteries
The bottom part of the handset contains a battery compartment for housing two type
AAA batteries (microcells).
➀
Socket for telephone
connector cable
➁
Socket for mains cable