Swisson XND-4, Руководство пользователя

Страница: 9 / 18

9
On the right side of the encoder knob, you can find the [Cancel] button (depicted on page 7), which is generally used
to dismiss a selection or to exit a menu.
By keeping the [Cancel] button pressed for at least two seconds, you can always navigate to the Home Screen. From
the Home Screen, the menu is launched by simply pushing the [OK] button.
The following notation is used to describe locations in the menu: Home > Menu > Sub menu > …
For example, the manual could say “navigate to Home > Menu > Art-Net”. This can be read as follows:
Keep [Cancel] pressed for 2 seconds to reach the Home Screen.
Then, press [OK] to get to the menu.
Select Art-Net using the encoder wheel.
After pressing [OK] again to confirm the selection, the Art-Net settings menu is displayed.
Home Screen
The Home Screen shows the IP address of the node as well as the current Art-Net net and
the Art-Net sub-net of the node. The numbers at the bottom of the screen display the 4-bit Art-Net universe of each
of the output ports.The left most number corrseponds to the universe of output 1.
Network Settings
The network settings can be found under Home > Menu > Network.
Home Screen of an XND-4
configured to its default
Art-Net IP address with
Art-Net universe
addressing information
displayed in hexadecimal. Home Screen indicating
that no signal is applied
to either of the input
ports. Home Screen of an XND-4
configured to its
alternative Art-Net IP
address with Art-Net
universe addressing
information displayed in
hexadecimal. Home Screen of an XND-4
configured to a custom IP
address (192.168.10.168)
with Art-Net universe
addressing information
displayed in decimal.