8
Output Ports
The output section
d
m
x
The Signal LED of the output section lights up when DMX data is available at the output
ports.
Each output port is individually optically isolated, meaning that it is totally isolated from the other output ports and
from the input selection.
The pins 4 and 5 of the output ports on the models with 5-pin XLR connectors are not connected.
Output Port
1
2
3
4
5
Protection
Tranceiver
Optical
Isolation
Port Supply
Control
Logic
Controller Supply
n.c.
Bias
Network
Wireless Port and Operating Modes
r : receiver
x
t : transmitter
x
link : press
unlink : press 3sec
Operating Modes
The XWL has three operating modes as described below. The
Mode button,
which is located above the
Rx
and the
Tx
LED
s, is used to select the current operating mode.
Splitter Only mode
. When both, the Rx LED and the Tx LED are off, the XSW operates as a splitter only. The
wireless port is switched off.
Receiver mode.
When the Rx LED is on, the XSW works as a wireless receiver. The received DMX data is
forwarded to the DMX output ports. The DMX input port has no function in this mode.
Transmitter mode.
When the Tx LED is on, the XSW operates as a wireless transmitter. The DMX data from
the DMX input port is transmitted and is also available at the DMX output ports.
