51
Operating when connected to a PABX
Gigaset CX100-150isdn / englisch / A31008-X150-G101-1-7619 / pabx.fm / 20.01.2004
Dialling options
The KEYPAD function allows you to control certain services by entering sequences of
characters and digits.
You should set the KEYPAD function if your device is connected to an ISDN PABX or to
an exchange, which is controlled by means of KEYPAD protocol. The digits/characters
0
to
9, *, #
are transmitted as keypad information elements. Please inquire of your service
provider about which information and codes you can transmit.
Setting options
You can switch between the settings
Standard dial
(factory setting),
Auto keypad
and
Dial * and #
.
Standard dial
Once
Standard dial
has been activated,
*
and
#
are not transmitted during dialling, and
if
*
and
#
are entered it is not possible to switch to the keypad.
Auto keypad
Once
*
or
#
has been entered, this setting automatically transfers ringing during dialling
to the keypad. This automatic switchover is needed for giving commands to the
exchange or PABX.
Dial * and #
Once
Dial * and #
has been activated, the
*
and
#
characters are transmitted during
dialling as commands to the exchange or PABX.
Regardless of the setting options above,
after dialling
or during the conversation, the
phone switches automatically to tone dialling (DTMF), for instance for remote control
of an answering machine.
MENU
Open the menu.
s
Base Settings
OK
Select the menu item and confirm.
s
Settings
OK
Select the menu item and confirm.
~
OK
Enter system PIN if required (page 30).
s
System settings
OK
Select the menu item and confirm.
s
Spec. function
OK
Select the menu item and confirm.
s
Dial properties
OK
Select the menu item and confirm.
s
Standard dial
OK
Select the setting and confirm, e.g.
Standard dial
(
‰
= activated).
