42
Registering/de-registering other handsets
Gigaset CX100-150isdn / englisch / A31008-X150-G101-1-7619 / registering_hs.fm / 20.01.2004
2. On the handset (within 30 sec.)
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
Manual registration:
Older handsets from the same manufacturer and other handsets with GAP
functionality
Below is an explanation of how to register these handsets.
If internal numbers
Int.11
to
Int.16
on your phone have already been assigned, please
de-register another handset you no longer require before registering a new one
(page 43).
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
The next unassigned internal number between
Int.11
and
Int.16
is automatically
assigned to the handset as it is registered.
MENU
Open the menu.
s
Handset Settings
OK
Select the menu item and confirm.
s
Register Handset
OK
Select the menu item and confirm.
s
Base 1
OK
Select base (1–4) and confirm, e.g.
Base 1
.
~
OK
Enter the system PIN for the base (the factory setting
is 0000) and confirm.
Registering
appears in the
display along with the name of the base e.g.
Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
s
Int.11
OK
Select internal number and confirm, e.g.
Int.11.
i
The handset interrupts the base search after 60 seconds. If registration
has not been completed within this time, repeat the procedure.
GAP
G
eneric
A
ccess
P
rofile = European standard for the interaction of handsets and
base stations made by different manufacturers.
÷
Press the registration/paging key on the base for
about 3 seconds. This starts the registration.
