Swisscom Aton CL112, Руководство пользователя

Страница: 38 / 69

37
Sending SMS (text messages)
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / sms_BRD_neutral.fm / 17.06.2010
V
e
rsion 4, 16.0
9
.2005
Setting SMS centres
SMS messages are exchanged between SMS
service centres operated by service provid-
ers. You must enter the SMS service centre
through which you wish to send and receive
SMS messages into your phone. You can
receive SMS messages from
every SMS serv-
ice centre that is entered, provided you have
registered with your service provider.
Your SMS messages are sent via the SMS
service centre that is entered as the active
send service centre . However, you can acti-
vate any other SMS centre as the active send
service centre to send a current message
(
¢
page 37).
The following SMS centre is pre-pro-
grammed:
– 062 210 00 0* (Swisscom)
Should you have any questions regarding
the SMS service, please contact your
provider.
If no SMS service centre is entered, the
SMS menu only consists of the entry
Service
Centres . Enter an SMS service centre
(
¢
page 37).
Entering/changing SMS service
centres
¤
Find out about the services and special
functions offered by your service pro-
vider
before you make a new applica-
tion and/or before you delete pre-config-
ured numbers.
§Menu§
¤
SMS
¤
Service Centres
s
Select SMS service centre (e.g.,
SMS centre # 1 ) and press
§OK§
.
You have the following options:
Active Send Srvc. Cent.
If SMS messages are to be sent via this
SMS centre, press
§OK§
to activate the SMS
centre (
³
= on). If a different SMS centre
was active previously, then this will be
deactivated. For SMS centres 2 and 3, the
setting only applies to the next SMS.
SMS centre #
Enter the number of the SMS centre and
press
§OK§
.
Sending an SMS via another SMS
service centre
¤
Activate the SMS centre (2 or 3) as the
active send service centre.
¤
Send the SMS.
This setting only applies to the next SMS to
be sent. Thereafter, the setting returns to
SMS centre # 1 .
Receiving SMS messages on
a PABX
u
You can only receive an SMS when Call-
ing Line Identification is forwarded
to the extension of the PABX (CLIP) .
The CLIP evaluation of the SMS centre
number is completed in your
Aton .
u
Depending on your PABX, you may have
to add the access code (external line pre-
fix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by send-
ing an SMS to your own number: once
with and once without the access code.
u
When you send SMS messages, your
sender number may be sent without your
extension number. In this case, the recip-
ient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
Please note
When supplied, the access number
(062 210 00 0*) for the Swisscom
SMS centre is pre-programmed.