12
Taking the first steps
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / starting.fm / 17.06.2010
V
e
rsion 4, 16.0
9
.2005
Setting up the base and charging cradle (if included)
The base and charging cradle are designed for use in dry rooms in a temperature
range of +5°C to +45°C.
¤
Set up the base at a central point in the building on a level, non-slip surface or
mount the base or charger on the wall (
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u
Protect your phone from moisture, dust, corrosive liquids and fumes.
Connecting the base
¤
First
, connect the power adapter
1
.
¤
Then
connect the telephone jack
2
and insert the cables into the cable
ducts.
Please note:
u
The power adapter must
always be
connected
, as the phone will not
operate without a mains connection.
u
Use only the power adapter and
phone cord
supplied
. Pin connec-
tions on telephone cables can vary
(pin connections,
u
The answering machine is ready for
use
approx. 15 seconds after
the
base has been connected or reset.
Please note
Pay attention to the range of the base.
This is up to 250 m in unobstructed outdoor areas and up to 40 m inside build-
ings. The range is reduced when Eco Mode is activated (
1
2
