Swiss Egro 50 Series, Руководство по эксплуатации

Страница: 46 / 48

Serie 50
11.03.2011 Page 46
Warning
No warranty will be assumed for water leading components if these instructions are
not followed!
13.3
Connect water drainage
• Connect the water drainage hose with a down gradient conduit to the central drainage system.
•
The input and drainage hoses must not be bent or crushed.
13.4
Electrical connections
•
A qualified electrician must make all electrical connections.
•
An electrical switch (mains switch) and/or an electrical socket must be connected, and readily
accessible, near the machine.
•
The electrical mains switch must isolate the Swiss Egro 50 Series completely from the electrical
mains supply. The gap between the contacts must be at least 3mm.
•
For the electricity supply, the data listed on the ID plate must be carefully consulted!
•
If the electrical supply cables to the machine are damaged the manufacturer or his service per-
sonnel, or an authorized electrician, to avoid any danger, must replace them.
14
Spare parts
Note
Spare parts or repairs are only to be supplied or carried out, respectively, by the Egro
service technician. Spare parts can be ordered directly from the following list. Please
always make a note of the part number when ordering!
Article Order No.
Coffee cleaner tabs (packs of 100 tabs) 005990
Cleaning Liquid (Milk cleaner) 055452
Milk foam head 100064.001
Coffee bean hopper 100035.001
Coffee bean hopper with cover plate 100119.001
Measuring spoon 8g 004775
Warning
Only original Egro Coffee Systems AG spare parts must be used.