Swiss Egro 50 Series, Руководство по эксплуатации

Страница: 13 / 48

Serie 50
11.03.2011 Page 13
On: The machine is switched on (display: Please Select) or it was switched off with the mode
switch (display: Standby)
2.6.3
Stop key
Also termed button 0, the Stop key is used for the following tasks:
•
Abort the current selection
•
Cancel the pre-selection or Shift
•
Programming
•
Start the various cleaning and rinsing programmes
2.6.4
Product keys
Note
Each product key can be programmed individually. During installation products are as-
signed to the individual keys by the EGRO technician according to your
requirements and wishes.
•
Keys 1 - 8 and 10 - 16: Coffee products and Shift
•
Key 9 used most time for Hot water
Note
The symbols located to the left of the product keys 0, 1, 3, 5, 7 and 9 refer to their use
in
Mode 3 (programming).
Please refer to section 6 'Programming'.
2.6.5
State LED
The LED is lit up during normal service. On pressing button 1 (Shift) the second LED lights up (se-
cond product level is active) and
Shift is shown in the display.
•
On: Product can be selected
•
Off: Product cannot be selected
•
Flashing: Product running
The availability of a product is determined by the programming as carried out by the service tech-
nician.
2.6.6
Shift Key (Key-pad 15 products)
The second product level will be reached by pressing the Shift key (button 1) and is confirmed by
the lighting up of the LED. The display is showing
Shift. Pressing the stop key or the Shift key car-
ries out return to the first level.