Swiss Timing TRACKER, Руководство пользователя

Страница: 13 / 21

TRACKER
3442.500.02
Version 2.1
Page 9
When the countdown reaches 0, the start sound is played, the red semaphores are
switched off, the green semaphores are switched ON and the start pulses are given (to
open the starting gate and start the main timer). A few seconds later, the Trackers display
the remaining laps and the controller display shows the race mode:
The lap counter can be modified on the Tracker (with its keyboard) or on the Main Judge
Controller using the corresponding “-1 LAP” key or “Shift” and then “+1 LAP”.
The main judge can also play sounds on the Tracker with the BELL and BANG keys (these
sounds will be played on both Trackers simultaneously).
To finish a race (to go from the lap counter mode to the countdown procedure) press the
“ESC” key; the message “Would you exit the race mode ?” is displayed; confirm by
pressing the “Yes” key. If the start/stop switch is not on the “O” position, a message asks
you to switch it.
To exit the race mode (go back to the main menu), you must be in the countdown
procedure and press the “ESC” key; the message “Would you exit ?” is displayed; confirm
by pressing the “Yes” key.
3.4 Time
This menu allows you to introduce the date and day time. Select the needed function key:
For the selection of the
date For the selection of the
hours
For the selection of the
month For the selection of the
minutes
For the selection of the
year