Swiss Timing TRACKER, Руководство пользователя

Страница: 10 / 21

Page 6
Version 2.1
3442.500.02
3 SOFTWARE
3.1 Main menu
After the TRACKER have been connected and switched on, switch on the main judge
controller with the switch on the rear side.
If the messages “Tracker 1 missing” and/or “Tracker 2 missing” are displayed, verify the
cabling and make sure the Tracker are powered and switched on; then you need to restart
the main judge controller by switching it off and on again.
After a few seconds the main menu screen should appear:
From this screen, you can go, by pressing the corresponding key, to:

Sport set(ting), see chapter 3.2 .

Race mode, see chapter 3.3 .

Time (& date) selection, see chapter 3.4 .

Console set(ting), see chapter 3.5 .
In this software, when you need to enter or modify a number, you have two possibilities:

by using the “up arrow” key to increase the value and the “down arrow” key to
decrease the value, or

by typing the number with the numeric keypad.
With both solutions, you then need to press
the “Enter” key to validate the entry or the
“ESC” key to cancel your modification and return to the previous value.