26/02/2013
Communication between V8 and a PC
To transfer the contents of the memory you must connect the reader to a PC via the USB cable. You
must then select the “Memory” menu and follow the instructions given on the display (see Block
Diagram: “Memory3”).
If the reader is connected to a PC it will transfer the number of the tag read on each reading. It is not
necessary for the “Memory” function to be activated to carry out this transfer.
Caution: for the reader to communicate with a PC, you must first install the driver and have software
such as Hyperterminal (Windows XP), Datatransfer (Felixcan), Realtrace Terminal, etc. which
enables the data to be displayed on the computer screen and processed if necessary.
PetScan RT100 V8
Serial link: use of the Windows « Hyperterminal »
The current version of the PetScan RT100 V8, transmits the read identifiers to the PC it is
connected to, either via the USB cable or its wireless link (Bluetooth). The PetScan does not wait
for any order or acknowledgement from the PC.
Hardware configuration
The serial port for reading the data is configured as follows:
- 9600 bauds, 8 bits, 1 start bit, 1 stop bit, non-parity, and no flow control
.
You must authorize line feeds to visualize the frames using the
hyperterminal
: click on
« properties » in the « file » menu. Go to the « parameters » and then click on «
ASCII Configuration… » :
The circled box above must be ticked…
Содержание V8BT
Страница 7: ...26 02 2013 Synoptic Menu Bluetooth 1 Bluetooth Enable Memory SCAN Enable Bluetooth Bluetooth ...
Страница 10: ...26 02 2013 Synoptic Menu Memory 1 Enable the Memory Memory M 0 SCAN Enable Language Bluetooth SCAN 5 secondes ...
Страница 17: ...26 02 2013 Select as shown below Then select System Then select Device Click Cliquez Click ...