Swisher Versa-RC, Руководство пользователя

Страница: 10 / 30

Operator Presence System:
Be sure to check that the operator presence and
interlock systems are working properly before every
use. If your mower does not function as described,
repair the problem immediately.
The Control Levers must be in the neutral position in
order for the machine to start. If the controls are not
exactly at neutral the unit will not start.
The attachment wiring harness must be connected in
order to run the PTO system. If it is not properly or
securely connected, the PTO will not engage.
Tires:
Keep tires free of gasoline, oil or insect control
chemicals which can harm rubber.
Avoid stumps, stones, deep ruts, sharp objects and
other hazards that may cause tire damage.
Blade Maintenance:
For best results, mower blades must be kept sharp.
Replace bent or damaged blades.
Engage brakes & safely tilt front of mower (SEE
WARNING).
Refer to Service and Adjustments section for
instructions.
V-Belts:
Check V-belts for deterioration and wear before each use
and replace if necessary. Replace belts if they begin to
slip from wear. Refer to Quick Reference and Service &
Adjustment sections of this manual for instructions on
belt part numbers and how to properly replace belts.
CAUTION
Stop engine, apply brakes, and
remove ignition key for safety.
Disconnect spark plug wires. Wear
heavy, thick gloves when holding onto
blade. Avoid the sharp edge of the
blade.
CUSTOMER RESPONSIBILITIES
10 10
Overall Unit Care:
Reduce the risk of fire by removing grass, leaves and
other debris that may accumulate on the machine.
Allow the machine time to cool before cleaning or
putting it in storage.
Wash mower periodically. Clean above and below
deck.
Keep all electrical connections clean and secure.
Driving & Transport on Public Roads:
Check applicable road traffic regulations before driving
and transporting on public roads.
If the machine is transported, you should always use
approved fastening equipment and ensure that the
machine is well anchored to the towing vehicle.
The cutting deck should also be lowered to the lowest
position and the parking brake engaged during
transport.
WARNING
When it is necessary to tilt the mower
for any repair or service, use safety
chains and/or jack stands to provide
adequate support. DO NOT rely on
hydraulic or mechanical jacks.
WARNING
STOP THE ENGINE AND
DISCONNECT THE SPARK PLUGS
BEFORE MAKING ANY
ADJUSTMENTS TO THE MACHINE!
WARNING
Do not overinflate the tires. Serious
injury can occur if the tire explodes