Swing-N-Slide Kodiak PROJECT 515, Руководство по сборке

Страница: 42 / 106

42
PROJECT 515
Fig. 33a
Fig. 32
1-1/4" screws 2-1/2" screw
Fig. 33
(2)
2-1/2" screws
each side
(3)
2-1/2" screws
underneath
2" x 4" x 57-1/4"
2" x 4" x 57-1/4"
2" x 4" x 23-1/4"
(2)
2-1/2" screws
each side
(3)
2-1/2" screws
each side
• BOTTOM OF LADDER RAIL •
Top Corner of 2" x 4"
Bottom Corner of 2'' x 4''
2- 1/2"
From Bottom
(6)
1-1/4''
screws
EXAMPLE OF LADDER RUNG INSTALLATION
STEP BRACKET
O. Ladder Assembly.
1. On ladder rails, mark all measurement locations for each side with
a pencil. Draw an angle line connecting measurements for each
ladder rung alignment. (Fig. 31)
2. Align top of step bracket with line and screw in place. Install a
ladder rung at each of the five locations. (Fig. 31) and (Fig. 32)
Repeat on other ladder rail.
3. Attach 2" x 4" x 23-1/4" to siderails using
(2) 2-1/2" screws per side.
4. Secure ladder to unit. (Fig. 33) and (Fig. 33a) Note: The top step
should be 11" below the deck and all steps should be level.
5. Screw (2) 2-1/2" screws into the ends of each ladder rung through
the left and right side rails. (Fig. 33a)
2-1/2’’
(2)
2-1/2" screws
per joint
8"
SIDE OPENING OPTION 1