3
FB160 / FB170 / FB175 / FB235 / FB255 / FB265
D
ok
: 101497C-
GB 2126
STANDARDS
Noise
Measurement in accordance with the standard EN 500-
4 Rev. 1:1998, Annex C:
Measurement uncertainty ± 0.5 dB (A) in 95% of the
measurements.
In accordance with the conditions in Directive 2000/14/
EC, Annex VI, the following values are reported:
FB160 FB 170 FB 175 FB 235 FB 255 FB 265
Sound
pressure
level at the
operator’s
ears, LpA
91 dB (A)
95 dB (A)
95 dB (A) 95 dB (A)
95 dB (A) 95 dB (A)
Permitted
sound
power
level, L
WA
108 dB (A) 108 dB (A)
108 dB (A)
108 dB (A)
108 dB (A)
108 dB (A)
Guaranteed
sound
power
level, L
WA
105 dB (A) 108 dB (A)
108 dB (A)
108 dB (A)
108 dB (A)
108 dB (A)
As the sound pressure level at the operator’s ears
exceeds 80 dB (A), ear protectors must be used during
operation!
Hand/arm vibrations
The vibration acceleration was measured in accordance
with the ISO 5349 standard during operation on a
surface of macadam. The measurement values were
translated into the maximum daily exposure time
for regular usage. For additional information about
vibrations, please confer the regulation AFS 2005:15
from the Swedish Work Environment Authority,
effective July 1st 2005.
Measurement uncertainty ± 0.3 m/s2 in 95% of the
measurements
SAFETY INSTRUCTIONS
• Before using the machine, the operator must be in-
formed of the manufacturer’s safety instructions and
instructions for use.
• The machine may only be used outdoors.
• The machine may not be used if protection and sa-
fety devices are not present or not working.
• The operator may not leave the machine unattended
when the engine is on. When the vibrator is con-
nected, the operator must be able to control the mo-
vement of the machine using the control handle and
the start/stop controls. The machine may be operated
only by a trained operator.
• During maintenance work or other interventions in
the machine, the engine must always be off.
• Switch the engine off before adding fuel. Avoid fuel
spillage and immediately wipe off any spilled fuel.
Add fuel only in well ventilated areas.
• Avoid touching hot engine parts, for example the
silencer.
• Before lifting the machine, check that the lifting de-
vice and its mounting are not damaged and that the
rubber dampers on the base plate are undamaged and
tightened.
• During transportation and storage, the fuel tank
should be empty and the fuel cock switched off.
• When the machine is parked, ensure that it cannot tip
over. The machine may not incline more than 20º.
• The operator must use ear protectors when working
with the machine.
• The operator must ensure that no unauthorised per-
sons are in the immediate vicinity of the machine.
•
Always wear personal protective equipment as heavy,
non-slip shoes, ear protectors and approved eye
protection.
•
The machine may not be used in environments with
potentionell fire or explosion danger.
•
Never use the machine if you are tired or have
consumed alcohol or are under medication that
could affect your vision, your discretion or you
coordination ability.
•
Never use a machine in any way changed from the
original design.
Exhaust Emissions
The FB160 and FB 235 with petrol engine meet the
requirements for exhaust emissions in accordance with
EU Directive 2002/88EC stage 2.
The FB 170 / FB 175 FB 255 and FB 265 with diesel
engine meet the requirements for exhaust emissions in
accordance with
97/68/EC
.
FB 160 FB 170 FB 175 FB 235 FB 255 FB 265
2,5
2,7
2,7
2,7
2,7
2,7
8 h
6,9 h
6,9 h
6,9 h
6,9 h
6,9 h
Hand/arm
vibrations, m/s
2
The maximum
daily exposure
time