11
FB160 / FB170 / FB175 / FB235 / FB255 / FB265
spac107
spac104
spac105
spac106
D
ok
: 101497C-
GB 2126
Decompression handle
Throttle lever
Charging lamp and
engine start switch
Charging lamp and
engine start switch(key)
Handstart HATZ
Turn the key to the ignition position (apply to 1B30).
Pull the starter cord as far as it will go. Let the cord go
back in.
Handstart Yanmar
Press the decompression handle down. The handle
must remain in the depressed position. Switch the
engine power switch to “1”.
Take hold of the starter cord with both hands and pull
hard.
In very cold weather or if the battery capacity is low
for a different reason, starting can be facilitated using
the decompression device in connection with the valve
housing. Press the lever down and hold it down until
the flywheel has reached its maximum RPM. Then let
it go.
STOPPING
Switch the engine to the idle position idle, let it run for
a few minutes, then switch it to stop.
Yanmar
Never switch the engine off with the decompression
handle.
Switch the engine power switch to “0”.
Close the fuel cock.
HATZ
Turn the key. A whistlesignal is heard if the key is in
the ignition position.
Manual start
