SWELLPRO Spry+, Руководство пользователя

Страница: 10 / 38

©2019 SwellPro All Rights Reserved
10
SPRY+ has two Return Home modes: Manual Return and Out-of-Range Return.
Manual Return: When you activate return function of the Spry+, it will return to the remote controller. When
returning to the remote control 30 meters away, the aircraft will record the coordinates of the remote control
as the final return point. At this point, users can leave this location and let the aircraft land. (During the return
flight, if you operate the joystick, the aircraft will stop returning. If you stop operating the joystick, the aircraft
continues to return
）
Out-of-Range Return: If the drone loses contact with the remote control for any reason, the aircraft will
execute an automatic return to the last-known position of the remote control. During the return flight, if the
aircraft is reconnected to the remote control signal, the automatic return will be cancelled and the Spry+ will
await instructions from the remote controller.
Return Home
Operation
Description Illustration
Press and hold the Return Home switch for 2 seconds, the system will
beep and start the return process. At this point, the aircraft will
auto-return to the remote controller . “RTH” is displayed in the upper
right corner of the remote control screen.
To cancel the Return Home process, press and hold the Return Home
switch for 2 seconds, the system will beep and cancel the return process
after both joysticks have been moved.
Regardless of the vertical height, if the horizontal distance is <20 meters,
the drone will maintain its height and return.
Vertical height < 30metres and horizontal distance > 20metres, the
drone will ascend up to 30metres, and then return.
Return Process
Description Flare Maneuver
Return Home
Regardless of the vertical height, if the horizontal distance is <20 meters, the drone will maintain its
height and return.
During automatic Return Home, when the remote control signal is restored, switch the Flight Mode
briefly between GPS and ATTI mode and move the right joystick to take control of the drone and
cancel automatic return.