© 2015 SWELLPRO All Right s Reserved
20
Note: Radio controller was calibrated before ex-factory, no need to do the calibration once
again in normal situation. If in need (Side flight occurs after finishing the Accelerometer &
Compass calibration), it’s applicable to calibrate Radio controller indoor WITHOUT
Propellers.
1. Turn on radio controller, and then power on aircraft.
2. Connect to computer, and run the Assistant Software.
3. Choose ‘RC’ In ‘BASIC’ menu in the same interface of Software assistant, Click ‘ Calibration’ at
the Right-lower corner, system pops up a reminder dialogue to remind you what to do next.
4. Just follow the dialogue to rotate 2 joysticks (left/right) in clockwise circle two times with full
motion, then release.
5. Click ‘ Confirm’, then give all reminder dialogues a firm ‘OK’ to complete calibration.
6. Click ‘Download’ in right-upper corner to save changes, and disconnect by clicking ‘Disconnect’
once again. Then Radio controller calibration is done.
4.3.2 Radio controller Calibration
Calibration Steps:
Содержание Splash Drone Auto
Страница 45: ......
